EPS 400 Transitional Low Profile Overlay Floor Panel
£12.48 (inc.VAT)
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
Please see below for additional information on fitting.
The 20mm panels uses a 16mm pipe at 150mm pipe spacings. The panels should be secured with adhesive and can be laid onto any existing, level flooring.
EPS panels are made from high compressive strength Expanded PolyStyrene (EPS). EPS400 is the strongest density available today and can be used with all floor coverings. The panels are also fitted with 200 micron thick aluminium foil which is the most optimal for floor heat up times (allowing the floor to heat in 30 mins), any thicker than 200 microns offers no performance gain. Thinner aluminium foil layers makes heat up times much longer. The 200 micron boards allow heat outputs of 100w/m² for under wood and laminate floorings while offering 80w/m² for under carpet flooring.
VPS Underfloor Heating
- Secure Payments
- No Hassle Returns Policy
- Trade Customers Welcome
Description
EPS 400 Transitional Low Profile Overlay Floor Panel
Constructed from strong 400 kPa EPS, our Transitional boards are for use with our EPS Overfloor boards.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood, with a minimal height increase of just 20mm and a high compressive strength of 400KPA.
Constructed from strong 400 kPa expanded polystyrene (EPS), our transitional boards are for use with our EPS overlay boards.
These are ideal for areas of high pipe concentration – they are easily cut to size and shape to ensure energy-efficient and tidy management of dense pipe runs.
Tech Specs
Panel Details:
• High density quick response EPS400 floor heating panel
• Pre-formed channels, returns and turns
• 20mm panel designed for 16mm pipe
• Channels at 150mm pipe centres
• Dimensions: 1200mm x 600mm x 20mm
• R Value: 0.555m²k/w
• Each panel covers 0.72sqm
Made of lightweight high density polystyrene
• Easy to fit- can be cut to the desired size with a craft knife or saw
• Includes pre-bonded 200 micron aluminium surface
• Perfect for retro fit installations
• No need to dig up the floor to install underfloor heating
• No moisture, mess or lengthy drying times typical with screeding
• Very fast warm up times
