£13.00Original price was: £13.00.£10.12Current price is: £10.12. (inc.VAT)
Key Information Dimensions: 1200(L) x 600(W) x 6(D)mm For use directly onto joists or battens of up to 600mm centres Suitable for use with air source heat pumps Overlay panel can be easily cut to size 50-year guarantee The ProWarm 6mm ProFloor HDF Top Board might be lightweight, but don’t let that fool you; this board…
£29.99Original price was: £29.99.£23.33Current price is: £23.33. (inc.VAT)
The Prowarm 22mm ProFloor Foil Faced OSB3 Board is the ultimate base for your underfloor heating setup because it combines strength and functionality, offering solid support for your flooring while ensuring heat is distributed evenly. Key Information Dimensions: 1200(L) x 600(W) x 22(D)mm 75-micron foil surface Pre-grooved structural flooring For use directly onto joists or battens of…
Adhesive spray gun and hose set. For use with 13kg quick-drying adhesive canisters (sold separately). Ideal for securing EPS underfloor heating boards.
£12.00Original price was: £12.00.£10.63Current price is: £10.63. (inc.VAT)
XPS400 overlay boards are used to install underfloor heating onto existing floor surfaces. These panels can be secured to a solid subfloor and are perfect for retrofit installations.
£13.20Original price was: £13.20.£11.83Current price is: £11.83. (inc.VAT)
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS BUT THIS CAN INCLUDE EPS400 FOILED BOARDS**
1200mm x 600mm boards
Easy to cut and quick to install
Covers 0.72m²
20mm thickness
16 Channels (Grooves)
Strong 400 kPa compressive strength
Our boards are compatible with all floor finishes, making them perfect for any residential or commercial project.
Manufactured from strong 400kPa EPS, these Transitional Boards are to be used with our EPS Overfloor Boards in areas of high pipe concentration or where a corner needs to be formed.
For straight pipe runs, simply place them directly into the designated channels of the straight transitional board. Cut the boards to the desired length and width for a perfect fit.
To form corners, use the main transitional board. Cut two boards at a 45-degree angle each. Here’s the trick: leave a gap of about 120mm between the angled edges. This space allows the pipe to bend smoothly as it changes direction.
If needed, use suitable nail clips to secure the pipes to the subfloor before the next step.
Once the pipes are in place and secured (if necessary), fill the open area between the boards with renovation screed. This creates a smooth, finished surface.
Our transitional boards are easy to cut using a craft knife or a fine-toothed saw, allowing for precise adjustments during installation.
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
Download Data Sheet *PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS*
These EPS panels are designed to fit snugly between existing joists or between battens on concrete subfloors. In joist panels are 1200 mm x 350 mm x 50 mm, with 200 mm pipe spacing for 16 mm pipework. These panels provide insulation to prevent heat loss while the foil coating promotes an even heat distribution across your space. Once installed, floorboards are placed over the joists/battens as normal.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The NEW XPS 500 underfloor heating overlay boards offer a simple solution to install underfloor heating onto existing floors. These panels can be placed directly onto any solid surface and are perfect for retrofit installations. These boards feature performance benefits over the standard EPS Overlay Boards.
Wet Underfloor Heating Insulation Panels are required for underfloor heating as it relies on warm or hot water being pumped through a network of underfloor pipes to heat the floor and the room.
Underfloor heating insulation panels are important so that as much of this heat is retained and used as possible. In some cases, valuable heat can be lost through the floor.