Edge Insulation 25m x 150mm x 8mm
£15.10 (inc.VAT)Our Edging Insulation is to be used around the edge of the room to comply with Building Regulations and in order to minimize unwanted heat loss and allow for expansion.
Showing all 6 results
-
-
Pipe Staple Fixing Gun
£85.00 (inc.VAT)Provides a quick and easy method of fixing pipe staples to secure underfloor heating pipe into an insulated surface.
Easy-feed mechanism for fast installation both 40mm and 60mm pipe clips to floor insulation.
It replaces the requirement for manual fitting and provides improved working comfort
-
Pipe Staples x 300
Price range: £9.72 through £10.69 (inc.VAT)Underfloor heating staples fasten underfloor heating pipes to the insulation layer. Also known as pipe clips or tackers, they can be used on pipe diameters from 14 – 20mm. The staple sizes are 40 – 60 mm. 40 mm is preferred when insulation is thinner to avoid cracking the board. The underfloor heating staples are…
Select options This product has multiple variants. The options may be chosen on the product page -
Sale!
Self Adhesive Pipe Rail 1000mm
Original price was: £1.75.£1.38Current price is: £1.38. (inc.VAT)The clip rail track is ideal to use when installing a wet underfloor heating system on a screed floor. This rail is secured by the included self-adhesive backings.
Suitable for 15-16mm pipework.
-
Profix Plus Low Profile System for 12mm Pipe
£10.80 (inc.VAT)The Profix® PLUS Low Panel is a premium underfloor heating panel engineered for high-output performance and rapid installation. Patented to accommodate 10–12mm diameter pipe, it’s ideal for new builds and energy-efficient retrofits alike.
At just 16mm thick, the Profix® PLUS is one of the slimmest UFH panels available. Manufactured in the UK from 100% recycled plastic, it supports sustainable building practices without compromising on performance. The low-profile design is compatible with self-levelling screed as thin as 20mm.
Integrated retention clips hold pipes firmly in place, ensuring consistent spacing and optimal heat transfer throughout the floor. Self-adhesive backing and interlocking edges make installation quick, accurate and secure — with pipe spacing options from 50mm for tailored heat distribution. Each panel supports both serpentine and snail pipe layouts.
- High Heat Output
- Self Adhesive
- Interlocking System
- Variable Pipe Spacing Options from 50mm
- 12mm pipe
- Low Profile: 16mm
- Panel Size: 1200 x 600mm
-
Wet Screed Panels
£7.19 (inc.VAT)- Made from 100% recycled high impact plastic
- Each panel is 1250mm x 850mm x 20mm (1.06 sq. m)
- 50mm centres enabling spacing of 100mm, 150mm and 200mm centres.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 20 PANELS**
Check out our underfloor heating pipe fasteners designed for screed systems.
These fixings are used to hold pipes in place before being embedded in a screed layer.
Types of Pipe Fixings
1. Staples or Clips
This is the most common installation method. The staples are pushed into insulation and feature barbed ends for a secure hold.
-
Available in 60mm and 40mm sizes — ideal for use with standard or thinner insulation.
-
Typically installed every 0.5 meters, but spacing can be adjusted based on preference.
2. Pipe Rail
Supplied in 1-meter lengths, each rail includes an adhesive strip to stick directly to the subfloor.
- Pipes are held at 50mm spacing.
-
Useful for high-density areas and faster installations.
- Ideal for installation over solid flooring.
3. Wet Screed Panels
These panels create a grid system that guides pipe placement before screeding.
-
Provide extremely accurate 50mm spacing.
-
Offer the highest level of pipe guidance and consistency.
We also offer a range of underfloor heating tools to support the installation of underfloor heating pipes.
