16mm-15mm Reducer
£3.90 (inc.VAT)16mm-15mm Reducer
Showing 1–16 of 127 results
Underfloor Heating Manifolds available in 2-12 port configurations.
Explore detailed information about manifold dimensions, diagrams, and installation guidance on our dedicated manifold information page.
Our manifold extension kit allows you to add another VPS manifold to your existing VPS UFH setup. Extra manifolds sold separately.
XPS400 overlay boards are used to install underfloor heating onto existing floor surfaces. These panels can be secured to a solid subfloor and are perfect for retrofit installations.
XPS offers significant advantages over EPS.
*PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS*
22mm Blue Lever Ball Valve – WRAS Full Bore
22mm Red Lever Ball Valve – WRAS Full Bore
500ml can (covers 5m2).
Used to bond overlay boards to the floor.
The thermostatic mixing valve ESBE VTA 372 with an adjustable temperature range of 20°c and 55°c is designed especially for floor heating systems that require scalding protection from hot water.
The Salus CB500 control box is the main element of the underfloor heating / cooling control system. It has a built-in module that controls the heat and cool sources. The control box allows to control 5 different zones.
The CB500X extension module control box is an element of the underfloor heating / cooling control system. The control box allows you to control 5 different zones. Number of controlled zones can be increased up to 15 zones by connecting CB500X extension modules to the CB500 unit which is equipped with a module system that controls the source of heating and cooling.
28mm Red Lever Ball Valve – WRAS Full Bore
28mm Blue Lever Ball Valve – WRAS Full Bore
1″ Inch Isolating Blue Lever Ball Valve Female x Female – WRAS Approved Full Bore
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
We also offer 200 Micron Floor Panels.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS BUT THIS CAN INCLUDE EPS400 FOILED BOARDS**
Our boards are compatible with all floor finishes, making them perfect for any residential or commercial project.
Manufactured from strong 400kPa EPS, these Transitional Boards are to be used with our EPS Overfloor Boards in areas of high pipe concentration or where a corner needs to be formed.
For straight pipe runs, simply place them directly into the designated channels of the straight transitional board. Cut the boards to the desired length and width for a perfect fit.
To form corners, use the main transitional board. Cut two boards at a 45-degree angle each. Here’s the trick: leave a gap of about 120mm between the angled edges. This space allows the pipe to bend smoothly as it changes direction.
If needed, use suitable nail clips to secure the pipes to the subfloor before the next step.
Once the pipes are in place and secured (if necessary), fill the open area between the boards with renovation screed. This creates a smooth, finished surface.
Our transitional boards are easy to cut using a craft knife or a fine-toothed saw, allowing for precise adjustments during installation.
*now being replaced by superior xps400 boards*
XPS has various advantages over EPS.
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
Download Data Sheet
*PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS*
VPS Underfloor Heating
Unit 30, Westfield North Industrial Estate, Grayshill Road, Cumbernauld, G68 9HQ, Glasgow
Copyright © 2014 - 2024 VPS Trading Ltd - Registered in Scotland - SC604192 - VAT No. GB303867306