Showing all 2 results

  • Thermopads Electric Underfloor Heating 150w/m2 Mat Kits

    £31.76 – £511.32 (inc.VAT)

    The 150w/m2 underfloor heating mat is suitable for under tile heating in most living areas within the home.

    When the floor and room are well insulated the 150w/m2 system can also be used as the primary source of heat.

    Note: On concrete floors, and to gain maximum efficiency, it is always advisable to install a thermal barrier of insulation board of 6mm minimum thickness directly under the heating.

    View Installation Guide

    Select optionsDone

  • Thermopads Electric Underfloor Heating 200w/m2 Mat Kits

    £38.12 – £550.10 (inc.VAT)

    The 200w/m2 underfloor heating system offers a quicker warm up time than 150w/m2 and is suitable for under tile heating.

    It is recommended for conservatories, primary heat source applications, and to heat rooms with a higher heat loss.

    Also, it is used when a faster heat up is preferred – up to 25% faster warm up than a 150 w/m2.

    NOTE: 6mm or 10mm thick insulation boards installed directly under the heating will always increase performance, heat up time and save running costs.

    View Installation Guide

    Select optionsDone

Thermopads Underfloor Heating Mat Kits

The mats are 500mm wide and installations are completed in only a short time due to the ease of rolling out the matting side by side, and facility to remove heating cable from the mat, to fit any shape of room. The mat can be cut and turned with ease to run in strips side by side. These simple procedures are explained in the installation instructions.

Thermopads 150W and 200W UFH Kits

The 150w/m2 underfloor heating mat is suitable for under tile heating in most living areas within the home.

When the floor and room are well insulated the 150w/m2 system can also be used as the primary source of heat.

The 200w/m2 underfloor heating system offers a quicker warm up time than 150w/m2 and is suitable for under tile heating.

It is recommended for conservatories, primary heat source applications, and to heat rooms with a higher heat loss.

Also, it is used when a faster heat up is preferred – up to 25% faster warm up than a 150 w/m2.