Ball Valves 1″
£16.20 (inc.VAT)1 inch ball valve set.
Designed to be fitted to an underfloor heating manifold.
Showing 241–256 of 276 results
-
-
Ball Valves 1″ with Temperature Gauge
£31.01 (inc.VAT)1 inch ball valve set with temperature gauges.
Designed to be fitted to an underfloor heating manifold.
-
Swivel Connection Ball Valves 1″ Female x 1″ Female
£19.18 (inc.VAT)1-inch female ball valves with swivel nut. Used for bottom entry to the VPS manifold control pack, the swivel nut allows the unit’s rotation to be set manually
-
Grundfos Single Circuit Pump Pack w/ ESBE Mixing Valve Unit
£251.48 (inc.VAT)Grundfos/ESBE Pump mixer packs are designed for control of flow and water temperature in an Underfloor Heating System.
-
Manifold Actuator Valve
£10.50 (inc.VAT)Underfloor Heating Manifoldย Replacement Actuator Valve.
For use in most underfloor heating manifolds.
-
Manifold Control Pack c/w Grundfos UPM3 25-70 130 Pump, ESBE VTA372 Blending Valve
£220.80 (inc.VAT)Our Manifold Control Pack with Grundfos Pump and ESBE Valve is designed to be the field leading solution for underfloor heating systems. It is easily fitted to all standard underfloor heating manifolds.
-
Manifold Control Pack c/w Grundfos UPM3 25-70 130 Pump, ESBE T4 Blending Valve
£252.00 (inc.VAT)Our Manifold Control Pack with Grundfos Pump and ESBE Valve is designed to be the field leading solution for underfloor heating systems. It is easily fitted to all standard underfloor heating manifolds.
-
Heat Pump Control Pack
£198.00 (inc.VAT)Pre-assembled heat pump control pack. The ideal solution for systems where a heat pump is the primary heat source
-
Fittings for Manifold Control Pack
£46.80 (inc.VAT)Fittings pack to create manifold control pack.
- Return elbow + T junction
- Flow & return temperature gauges
- All necessary seals
-
Heat Pump Control Pack Fittings
£70.80 (inc.VAT)Fittings for heat pump control pack. The ideal solution for systems where a heat pump is the primary heat source
-
Metal Single Gang Back Box
£2.21 (inc.VAT)Metal Single Gang Back Box primarily used to Install Heatmiser Flush Mount Thermostats on Brick Walls.
-
Heavy Duty Underfloor Heating Pipe Decoiler
£172.00 (inc.VAT)Heavy duty Pipe decoiler used when laying underfloor heating pipe. Features support arm to assist he unwinding of the pipe from the coil.
- Suitable for 200m โ 600m coils
- Pipe unwinds easily, quickly, and is pre-straightened and ready for use
- Reduces the risk of pipe damage
- Robust heavy duty design constructed from steel box section
-
Underfloor Heating Pipe Decoiler
£105.00 (inc.VAT)Pipe decoiler used for speeding up underfloor heating installation.
- Suitable for 50m โ 500m coils
- Pipe unwinds easily, quickly, and is pre-straightened and ready for use
- Reduces the risk of pipe damage
-
Pipe Reaming Tool
£3.60 (inc.VAT)Reaming tool that re-rounds underfloor heating pipe prior toย connection to the manifold or valve.
-
Pipe Staples x 300
Price range: £9.72 through £10.69 (inc.VAT)Underfloor heating staples fasten underfloor heating pipes to the insulation layer. Also known as pipe clips or tackers, they can be used on pipe diameters from 14 โ 20mm. The staple sizes are 40 – 60 mm. 40 mm is preferred when insulation is thinner to avoid cracking the board. The underfloor heating staples are…
Select options This product has multiple variants. The options may be chosen on the product page -
ProWarm Pro Digital Thermostat
£59.99 (inc.VAT)The slimline Pro Digital features advanced controls for an entry-level thermostat. Able to use either floor, air or combination sensors to control the temperature, the Pro Digital is fully programmable for each individual day of the week.
