16mm-1/2″ Male Press Fitting
£5.02 (inc.VAT)Our 16mm x 1/2″ male press fitting can be used to screw onto or into a 1/2″ female thread to connect the two together.
Showing 145–160 of 284 results
-
-
-
16mm-16mm Press Fitting
£5.02 (inc.VAT)High-Quality WRAS Approved press fittings for 16mm multilayer pipe. Suitable for the use in wet floor heating systems and potable water applications.
-
Aluminium Spreader Plates
Price range: £4.80 through £5.40 (inc.VAT)Aluminium spreader plates are ideal for underfloor heating applications on suspended floor constructions.
The floor void must be insulated and it is advised to minimise airflow to reduce the possibility of heat loss. For irregular joist widths cut the plates to fit.
Each panel is 1000mm x 390mm with a choice of 125mm or 200mm spacing.
Select options This product has multiple variants. The options may be chosen on the product page -
Aluminium Spreader Plates – 133mm
£5.40 (inc.VAT)Aluminium spreader plates are ideal for underfloor heating applications on suspended floor constructions.
The triple grooves gives an average of 133mm pipe centres over the floor.
The floor void must be insulated and it is advised to minimise airflow to reduce the possibility of heat loss. For irregular joist widths cut the plates to fit.
Each panel is 1000mm x 390mm.
-
Aluminium Spreader Plates – 200mm
£4.80 (inc.VAT)Aluminium spreader plates are ideal for underfloor heating applications on suspended floor constructions.
The floor void must be insulated and it is advised to minimise airflow to reduce the possibility of heat loss. For irregular joist widths cut the plates to fit.
Each panel is 1000mm x 390mm.
-
Aluminium Spreader Plates 600mm Wide with 200mm pipe spacings
£6.90 (inc.VAT)These spreader plates are custom made. Please contact us for a price and lead time.
alternate sizes are also available.
Wide aluminium spreader plates suited for joisted flooring with 600 centre’s.
Each panel is 1000mm x 590mm and holds 3 pipe runs to give 200mm spacing.
Theses panels are wider than standard 2 groove and 3 groove plates. -
Fit From Below Aluminium Spreader Plates 250mm x 1,000mm
£6.60 (inc.VAT)Aluminium spreader plates are ideal for underfloor heating applications on suspended floor constructions.
These are commonly fitted in new build property first floors where the floors have been fitted but ceilings have still to be put up.
Each panel is 1000mm x 250mm to give 225mm spacings.
-
Fit From Below Single Aluminium Spreader Plates 100mm x 1,000mm
£6.00 (inc.VAT)Aluminium spreader plates are ideal for underfloor heating applications on suspended floor constructions.
These are commonly fitted in new build property first floors where the floors have been fitted but ceilings have still to be put up.
Each panel is 1000mm x 150mm. Can be used with our double fit from below plates to achieve pipe spacings of 150mm.
-
Colour Coded Pipe Layout Free
£0.00 (inc.VAT)On receipt of your order, our team will produce a CAD pipe layout design for your project.
-
Dry Lining Easy Fix Box
£2.35 (inc.VAT)35mm single gang plastic “easi fix” fixing box.
For Use on Plasterboard Walls Easily mount your Heatmiser Flush Mount Thermostat to the Easy Fix Box
-
Edge Insulation 25m x 150mm x 8mm
£15.10 (inc.VAT)Our Edging Insulation is to be used around the edge of the room to comply with Building Regulations and in order to minimize unwanted heat loss and allow for expansion.
-
Edge Insulation 50m x 100mm x 5mm
£11.10 (inc.VAT)Currently out of stock.
We have 25m rolls of a slightly higher specification (8mm thick, 150mm tall) available here.
-
Edge Insulation 50m x 150mm x 8mm
£23.16 (inc.VAT)Currently out of stock. We have 25m rolls with the same specification available here.
-
Heat-Pak™ Dual Overlay System
Price range: £64.00 through £647.14 (inc.VAT)Size 1200mm x 600mm Top Board Thickness 4mm Base Board Thickness 3mm Composition MDF, fitted with an interactive adhesive Density (kg/m3) 770 Bending Strength kg/cm2 >40 Humidity (%) 4-10 Thermal Rm value [m2.K.W.-1] 0.047 Fire Class, DIN4102 B2 Select options This product has multiple variants. The options may be chosen on the product page -
Heatmiser Boost
£53.71 (inc.VAT)The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.
