Pressure Test Pump RP-50

The Pressure Test Pump RP-50 is a precision tool designed for testing the pressure and installation tightness of a system using water or oil as the testing liquid. This manual pressure test pump is ideal for DIY use, as it is lightweight, reliable, and cost-effective without compromising performance.

Perfect for anyone looking to pressure test underfloor heating systems, the RP-50 ensures accurate and consistent results before final installation stages.

Key features of the pressure test pump

• Clear, easy-to-read gauges to monitor pressure over time
• 1/2″ female BS fitting for simple connection to your system
• Maximum testing pressure of 50 bar
• Lightweight and easy to handle

How to pressure test underfloor heating

Pressure testing underfloor heating using a pump is required when to help identify leaks and ensure system integrity.

1. Install and fully fill the underfloor heating system
2. Connect the RP-50 pressure test pump via the 1/2″ female BS fitting to the fill and drain port, or the main flow and return using a relevant fitting.
3. Ensure all other system entries are fully closed
4. Pump the handle until the required testing pressure is reached (6 bar)
5. Monitor the pressure for approximately 2 hours to check for any drops or leaks

Specifications  of the Pressure Test Pump
Dimensions LWH –  49X16X16cm
Wight – 7.64kg
Tankvolume – 12L
Outletconnection – R1/2”
Testingfluid – water,oil
Maximumtemperature – 50°C-120°F
Maximumpressure – 50bar-5MPa