Home » Underfloor Heating Loose Cable Kits » 100w ProWarm™ Loose Cable Kit

100w ProWarm™ Loose Cable Kit

£45.60£442.99 (inc.VAT)

100w/m2 underfloor heating cables provide a highly economical floor warming system and are used to cover larger areas.

Cable must be spaced 10cm apart to achieve correct wattage output.

100w/m2 are not suitable as a primary heating source, only to be used as secondary heating for under tiled floors.

When you buy a ProWarm™ cable and thermostat, as part of one of our kits, you get the rest of the kit accessories thrown in for free!

Choose your Thermostat:

VPS Underfloor Heating

  • Check Mark Secure Payments
  • Check Mark No Hassle Returns Policy
  • Check Mark Trade Customers Welcome
PAY WITH CONFIDENCE
  • Visa Card
  • MasterCard
  • PayPal

When you buy a ProWarm™ cable and thermostat, as part of one of our kits, you get the rest of the kit accessories thrown in for free!

ProWarm™ Electric Underfloor Heating loose cable kit provides a reliable and effective underfloor heating system that can work with tiles and many other floor coverings (installation methods differ, please call us for advice).

Each ProWarm™ underfloor heating system and thermostat comes with a Lifetime Warranty.

Full Technical Support is provided free of charge by our team of Fully Qualified Electricians and for total peace of mind each system comes with the amazing CableSafe™ Guarantee – cut through your heating cable during installation and ProWarm™ will replace your cable free of charge. Click here for Terms and Conditions

Please ensure all Safety Guidelines are adhered to during and after installation of this product.

ProWarm™ Underfloor Heating kits contain everything you need to install them – all packed and supplied in one box complete with full colour instructions.

VPS Underfloor Heating are an Approved Partner of ProWarm™ Underfloor Heating Systems. Visit www.prowarm.com for more details.

Please choose an electric underfloor heating cable kit that will cover 90% of your floor area. It is best to order slightly less than you need than have too much as the cables CAN NOT be cut or shortened.

Electric underfloor heating kits contain the following items:

 

Loose Cable Kit
  • ProWarm™ Underfloor Heating Cable Drum (or 2 drums if over a 180 linear metres)

Our underfloor heating loose cable systems are the ideal solution for those complicated floor areas where a mat is not suitable, our systems are all rated at 10w per linear meter, this means the closer you space the cable the higher the output.

  • Digital thermostat

Choice of programmable digital thermostat with floor temperature probe. All Prowarm™ digital thermostats come with a Lifetime Warranty*.

  • Floor Primer

Prowarm™ Ultraprime is a high performance primer – increasing bond strength and flexural performance whilst reducing water penetration. It has been designed to be a universal priming/sealing agent and is suitable for a variety of building substrates including plaster, timber, brick and block work.

  • High Quality Roller

For applying floor primer to sub-floor

  • Adhesive Tape

To assist in holding mat or cable in position when installing

Choose your Thermostat:

Thermostats

No Thermostat Required £0.00, ProWarm™ Pro Digital – White £41.00, Heatmiser Slimline-E – White £39.58, Heatmiser Touch-E V2 – White £42.33, Heatmiser Touch-E V2 – Carbon £42.33, Heatmiser Neostat-E – White £60.92, Heatmiser Neostat-E – Silver £60.92, Heatmiser Neostat-E – Black £60.92, ProWarm ProTouch-E Wifi – White £87.16, ProWarm ProTouch-E Wifi – Black £87.16

Specification

ProWarm™ Underfloor heating cable is a series type heating cable of with a twin conductor with cold lead of 3.0M on one side. The cable has resistance heating wire provided with a primary insulation of fluoropolymer then covered with metal shielding and final outer sheath. The final outer diameter of twin conductor cable is 3mm.

The Hot and Cold lead junctions are uniquely designed to make them 100% foolproof.

100w/m2 underfloor heating cables provide a highly economical floor warming system and are used to cover larger areas.

Cable must be spaced 10cm apart to achieve correct wattage output.

100w/m2 are not suitable as a primary heating source, only to be used as secondary heating for under tiled floors

Safety Guidelines

Click for full ProWarm™ Safety Guidelines