The NEW XPS 500 underfloor heating overlay boards offer a simple solution to install underfloor heating onto existing floors. These panels can be placed directly onto any solid surface and are perfect for retrofit installations. These boards feature performance benefits over the standard EPS Overlay Boards.
£12.00Original price was: £12.00.£11.83Current price is: £11.83. (inc.VAT)
XPS400 overlay boards are used to install underfloor heating onto existing floor surfaces. These panels can be secured to a solid subfloor and are perfect for retrofit installations.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS BUT THIS CAN INCLUDE EPS400 FOILED BOARDS**
1200mm x 600mm boards
Easy to cut and quick to install
Covers 0.72m²
20mm thickness
16 Channels (Grooves)
Strong 400 kPa compressive strength
Our boards are compatible with all floor finishes, making them perfect for any residential or commercial project.
Manufactured from strong 400kPa EPS, these Transitional Boards are to be used with our EPS Overfloor Boards in areas of high pipe concentration or where a corner needs to be formed.
For straight pipe runs, simply place them directly into the designated channels of the straight transitional board. Cut the boards to the desired length and width for a perfect fit.
To form corners, use the main transitional board. Cut two boards at a 45-degree angle each. Here’s the trick: leave a gap of about 120mm between the angled edges. This space allows the pipe to bend smoothly as it changes direction.
If needed, use suitable nail clips to secure the pipes to the subfloor before the next step.
Once the pipes are in place and secured (if necessary), fill the open area between the boards with renovation screed. This creates a smooth, finished surface.
Our transitional boards are easy to cut using a craft knife or a fine-toothed saw, allowing for precise adjustments during installation.
These EPS panels are designed to fit snugly between existing joists or between battens on concrete subfloors. In joist panels are 1200 mm x 350 mm x 50 mm, with 200 mm pipe spacing for 16 mm pipework. These panels provide insulation to prevent heat loss while the foil coating promotes an even heat distribution across your space. Once installed, floorboards are placed over the joists/battens as normal.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
Adhesive spray gun and hose set. For use with 13kg quick-drying adhesive canisters (sold separately). Ideal for securing EPS underfloor heating boards.
£13.20Original price was: £13.20.£11.83Current price is: £11.83. (inc.VAT)
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.
Download Data Sheet *PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS*
Discover our low-profile overlay panels for wet underfloor heating. Panels are 20 mm thick and are designed to accommodate 16mm pipes with a 150mm spacing. Explore options in 100 and 200 microns. We also offer transitional panels for areas with higher density requirements. Complete your installation with our range of adhesives suitable for attaching the panels to any solid floor. Achieve efficient and effective underfloor heating with these versatile and easy-to-install panels.
VPS UFH Customer
