VPS Manifold Extension Kit
£43.08 (inc.VAT)Our manifold extension kit allows you to add another VPS manifold to your existing VPS UFH setup. Extra manifolds sold separately.
Showing 1–16 of 114 results
Our manifold extension kit allows you to add another VPS manifold to your existing VPS UFH setup. Extra manifolds sold separately.
22mm Blue Lever Ball Valve – WRAS Full Bore
22mm Red Lever Ball Valve – WRAS Full Bore
500ml can (covers 5m2).
Used to bond EPS floor panels to the floor.
The thermostatic mixing valve ESBE VTA 372 with an adjustable temperature range of 20°c and 55°c is designed especially for floor heating systems that require scalding protection from hot water.
The Salus CB500 control box is the main element of the underfloor heating / cooling control system. It has a built-in module that controls the heat and cool sources. The control box allows to control 5 different zones.
The CB500X extension module control box is an element of the underfloor heating / cooling control system. The control box allows you to control 5 different zones. Number of controlled zones can be increased up to 15 zones by connecting CB500X extension modules to the CB500 unit which is equipped with a module system that controls the source of heating and cooling.
28mm Red Lever Ball Valve – WRAS Full Bore
28mm Blue Lever Ball Valve – WRAS Full Bore
1″ Inch Isolating Blue Lever Ball Valve Female x Female – WRAS Approved Full Bore
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
We also offer 200 Micron Floor Panels.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.Â
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.Â
Please see below for additional information on fitting.
The 20mm panels uses a 16mm pipe at 150mm pipe spacings. The panels should be secured with adhesive and can be laid onto any existing, level flooring.
EPS panels are made from high compressive strength Expanded PolyStyrene (EPS). EPS400 is the strongest density available today and can be used with all floor coverings. The panels are also fitted with 200 micron thick aluminium foil which is the most optimal for floor heat up times (allowing the floor to heat in 30 mins), any thicker than 200 microns offers no performance gain. Thinner aluminium foil layers makes heat up times much longer. The 200 micron boards allow heat outputs of 100w/m² for under wood and laminate floorings while offering 80w/m² for under carpet flooring.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
The EPS 400 low profile overlay floor panel (1200mm x 600mm x 20mm) offers a simple solution to install underfloor heating into your home without the need to uplift your floor. The panels can be placed directly onto the existing concrete, floorboards or solid flooring and are a perfect choice for retrofit installations.
They are suitable for laminate, carpet, tiles, vinyl and engineered wood. With a minimal height increase of just 20mm and a high compressive strength of 400KPA they are very lightweight meaning they are simple to fit and are easily installed.Â
These EPS panels are designed to fit snugly between existing joists or between battens on concrete subfloors. In joist panels are 1200 mm x 350 mm x 50 mm, with 200 mm pipe spacing for 16 mm pipework. These panels provide insulation to prevent heat loss while the foil coating promotes an even heat distribution across your space. Once installed, floorboards are placed over the joists/battens as normal.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
1″ Inch Isolating Blue Lever Ball Valve Female x Female
Ball Valves designed to be fitted to one of our manifolds.
VPS Underfloor Heating
Unit 30, Westfield North Industrial Estate, Grayshill Road, Cumbernauld, G68 9HQ, Glasgow
Copyright © 2014 - 2024 VPS Trading Ltd - Registered in Scotland - SC604192 - VAT No. GB303867306
This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.
Strictly Necessary Cookie should be enabled at all times so that we can save your preferences for cookie settings.
If you disable this cookie, we will not be able to save your preferences. This means that every time you visit this website you will need to enable or disable cookies again.
More information about our Cookie Policy