Heatmiser Slimline V4
£50.34 (inc.VAT)The Heatmiser Slimline V4 Programmable Room Thermostat is a room stat and programmer in one, providing up to 4 different temperatures at different times of the day.
Showing 1–16 of 98 results
-
-
EPS 400 Transitional Low Profile Overlay Floor Panel
£12.48 (inc.VAT)**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS BUT THIS CAN INCLUDE EPS400 FOILED BOARDS**
- 1200mm x 600mm boards
- Easy to cut and quick to install
- Covers 0.72m²
- 20mm thickness
- 16 Channels (Grooves)
- Strong 400 kPa compressive strength
Our boards are compatible with all floor finishes, making them perfect for any residential or commercial project.
Manufactured from strong 400kPa EPS, these Transitional Boards are to be used with our EPS Overfloor Boards in areas of high pipe concentration or where a corner needs to be formed.
For straight pipe runs, simply place them directly into the designated channels of the straight transitional board. Cut the boards to the desired length and width for a perfect fit.
To form corners, use the main transitional board. Cut two boards at a 45-degree angle each. Here’s the trick: leave a gap of about 120mm between the angled edges. This space allows the pipe to bend smoothly as it changes direction.
If needed, use suitable nail clips to secure the pipes to the subfloor before the next step.
Once the pipes are in place and secured (if necessary), fill the open area between the boards with renovation screed. This creates a smooth, finished surface.
Our transitional boards are easy to cut using a craft knife or a fine-toothed saw, allowing for precise adjustments during installation.
-
Foil Faced In Joist/Batten Panels
£9.48 (inc.VAT)These EPS panels are designed to fit snugly between existing joists or between battens on concrete subfloors. In joist panels are 1200 mm x 350 mm x 50 mm, with 200 mm pipe spacing for 16 mm pipework. These panels provide insulation to prevent heat loss while the foil coating promotes an even heat distribution across your space. Once installed, floorboards are placed over the joists/battens as normal.
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
-
XPS 500 Underfloor Heating Overlay Boards – Super High Output 120mm
£11.56 (inc.VAT)The NEW XPS 500 underfloor heating overlay boards offer a simple solution to install underfloor heating onto existing floors. These panels can be placed directly onto any solid surface and are perfect for retrofit installations. These boards feature performance benefits over the standard EPS Overlay Boards.
- Light bulb returns
- Foil is fitted into main grooves
- 200 micron foil
- 120 mm pipe centres
- Used with all floor coverings
**PLEASE NOTE: THIS PRODUCT HAS A MINIMUM ORDER QUANTITY OF 10 BOARDS**
-
Heatmiser Slimline-RF Kit – Multi Mode Slimline Wireless Thermostat RF Receiver
£79.21 (inc.VAT)The Heatmiser Slimline-RF Kit V2 comprises of a Heatmiser Slimline-RF v2 Multi Mode Thermostat and RF-Switch wireless receiver.
-
Insulation Fixing Pack (25mm)
£14.40 (inc.VAT)100 x Pozi Drive Screws (25mm) & 100 Washers.
Required to fix 10mm reinforced insulation boards to timber floors, pack includes sufficient fixings for up to 5.5m2 (7 boards).
Includes-100qty M6 x 30m diameter penny washers, 100qty 3.5 x (25mm) coated pozi drive screws.
-
Insulation Fixing Pack (30mm)
£18.00 (inc.VAT)100 x Pozi Drive Screws (25mm) & 100 Washers.
Required to fix 10mm reinforced insulation boards to timber floors, pack includes sufficient fixings for up to 5.5m2 (7 boards).
Includes-100qty M6 x 30m diameter penny washers, 100qty 3.5 x (30mm) coated pozi drive screws.
-
ProWarm™ Floor Probe
£12.96 (inc.VAT)Additional or replacement floor temperature probe for use with all our ProWarm digital thermostats.
-
Heatmiser RF Switch
£41.88 (inc.VAT)The Heatmiser RF Switch is a surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler.
The RF Switch is compatible with the Slimline-RF and neoAir. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.
-
Heatmiser RF Switch 16A
£48.34 (inc.VAT)Heatmiser RF Switch 16A
The Heatmiser RF Switch 16A is our surface mount wireless receiver for electric heating. It is capable of switching up to 16A.
Please note: This is not designed for electric floor heating as there is no floor limiting sensor function. -
Heatmiser 2 Wire Thermal Actuator (TA230)
£14.16 (inc.VAT)The Heatmiser TA230 is our 2 wire thermal actuator.
Download Data Sheet -
Heatmiser EA1 – Extended Aerial (EA1)
£12.82 (inc.VAT)Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre.
-
Manifold Actuator Valve
£10.50 (inc.VAT)Underfloor Heating Manifold Replacement Actuator Valve.
For use in most underfloor heating manifolds.
-
Sale!
Heatmiser neoAir V3 Smart Thermostat Glacier White
Original price was: £77.50.£61.48Current price is: £61.48. (inc.VAT)The Heatmiser neoAir V3 is our programmable wireless thermostat that is compatible with our RF Switch / UH8-RF and neoHub Mini Wireless Receivers.
Download ManualDownload Data Sheet -
Heatmiser neoAir V3 Smart Thermostat – Sapphire Black
£77.50 (inc.VAT)The Heatmiser neoAir v3 is our programmable wireless thermostat. When paired to the neoHub (sold separately) you can control your heating and hot water from anywhere.
Download ManualDownload Data Sheet -
Heatmiser neoAir V3 Smart Thermostat – Platinum Silver
£77.50 (inc.VAT)The Heatmiser neoAir v3 is our programmable wireless thermostat. When paired to the neoHub (sold separately) you can control your heating and hot water from anywhere.
Download ManualDownload Data Sheet